10 Best Arduino Laser Detectors – Of 2022

If you are looking for a product that can help make your life simple, you have come to the right place. The market is filled with different types of products that vary in features and specifications. Choosing the right arduino laser detectors can be a hassle. The following guide will help you choose the arduino laser detectors that best suit your needs.

We all want to pick a beautiful, sturdy, and durable product, but there are so many products available in the market that it can be confusing to choose one. This article will help you choose the right arduino laser detectors more easily.

10 arduino laser detectors: Editor Recommended

10 arduino laser detectors Review:

1. Acxico 2Sets Laser Sensor Module For Arduino AVR(KY-008 Laser Transmitter +Laser Receiver Sensor Module Non-modulator Tube)

Features :

  • Operating voltage: 5V
  • Source wavelength: 650 nm
  • Apply to: for Arduino AVR
  • Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module
  • Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use.

2. Ximimark 5Pcs Laser Sensor Module Non-Modulator Tube Laser Receiver Detection Module Relay Switch 5V for Arduino

Features :

  • Supply voltage: 5V
  • Output: High level when there is laser irradiation, low level when there is no laser irradiation.
  • This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
  • Size: 1.52CM*2.22CM (1CM=0.393inch)
  • We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

3. SmartLam TP-Solar 0.2-12M lidar Sensor Scanner Laser Range Finder Module Proximity Distance Detector lidar Drone for arduino Raspberry pi Motion Sensor

Features :

  • [Eye Safety]TP-Solar uses 850nm LED safety light source to add more use scenarios, including medical and public scenarios, and to extend the module’s life to more than 30,000 hours
  • [High Performance]Operating range is 0.2m-12m(indoor/90% reflectivity).High frame rate, up to 500Hz (@5us integrated time),but it only keep 4g at weight。To improve applicability, TP-Solar supports common communication interfaces — UART and IIC .It is compatible with STM32,Raspberry Pi and Arduino.
  • [Small size and light weight] With 42mm×15mm×17mm small size which easy to install and integrate into any products,and also with only 4g weight could meet the require those applications strictly need load requirements
  • [Low Power Consumption] Power Consumption of TP-Solar is lower than 0.4W,suitable for battery-powered or low power consumption scenarios.In addition, sensors are also provided temperature, amplitude,ambient light and TOF phase information.
  • [Better service] We will provide a mailbox on the package to facilitate customers to contact us for any problems they encounter in the testing process. We have a professional team to provide customers with free guidance and suggestions, and give feedback within 24 hours. Meanwhile, we can provide long-term stable supply of goods and preferential prices

Additional Info :

Color Black
Item Dimensions
Height 0.67
Width 0.59
Length 1.65

4. Geekstory 5V Laser Receiver Sensor Detection Module Non-Modulator Tube for Arduino Geekstory(Pack of 5)

Features :

  • The sensor uses a non-modulated laser receiver.
  • Please use this sensor in dark environments or indoors where no light. Sunlight or other fixtures may interfere.
  • It output high level when receive laser signal, and low level when not.
  • If you buy 1, you will receive 5pcs sensor
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will solve your problem in 24 hours.

Additional Info :

Item Dimensions
Weight 0.033125

5. ACEIRMC 2pcs VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC (Purple)

Features :

  • 1.The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.
  • 2.The VL53L0 uses ST’s FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
  • 3.Ranging measurements are available through the sensor’s I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
  • 4.The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
  • 5.A time-of-flight ranging system integrated into a compact module

Additional Info :

Color Purple
Item Dimensions
Height 0.393700787
Width 0.393700787
Length 0.787401574

6. Acxico 1Set PMS5003 Sensor Module PM2.5 High Precision Laser Dust Sensor Digital Particle Concentration Laser Sensor+Cable for Arduino

Features :

  • The sensor uses the principle of laser scattering. It means that the laser light on the particles in the air and making the scattering, while collecting scattered light at a particular angle , resulting in scattered light intensity with time curve. In the end, equivalent particle diameter and the number of particles with different diameter per unit volume can be calculated by microprocessor based on MIE theory.
  • Mainly output as the quality and number of each particles with different size per unit volume, the unit volume of particle number is 0.1L and the unit of mass concentration is μg/m³.
  • There are two options for digital output: passive and active. Default mode is active after power up. In this mode sensor would send serial data to the host automatically .The time interval is 200-800ms, the higher of the concentration, the shorter of the interval.
  • The active mode is divided into two sub-modes: stable mode and fast mode. If the concentration change is small the sensor would run at stable mode with the real interval of 2s.
  • The principle of laser scattering to achieve accurate measurement.Minimal resolution particle size 0.3um.Zero error alarm rate.Real-time response and support for continuous acquisition.Inlet direction is optional, the use of a wide range of users without the need for duct design.

7. Laser Sensor Receiver Module Kit Laser Sensor Module Transmitter Module for Arduino AVR PIC STM32

Features :

  • Effective distance: 0.8m(typ), 1.5m(max)
  • Power: 2.5V ~ 5.0V
  • Dimension: 53.0mm * 18.0mm
  • Mounting holes size: 2.0mm
  • Signal output indicator

Additional Info :

Item Dimensions
Weight 0.02

8. DEVMO 2PCS 5V Sensor Module Board Compatible with Ar-duino AVR PIC KY-008 Laser Transmitter Wave Length 650 nm

Features :

  • ★Operating voltage: 5V
  • ★Output wavelength 650 nm
  • ★3 pins module
  • ★With fixed bolt hole for easy installation
  • ★Package Includes: 2PCS Sensor Module Board

Additional Info :

9. waveshare Laser Sensor Detector Module Receiver Transmitter Compatible Arduino AVR PIC STM32 Application for Obstacle Detection Pipeline Counter Smart Robot Obstacle-Avoiding Car

Features :

  • Features boost circuit
  • Signal output indicator
  • Obstacle detection
  • Pipeline counter
  • Smart robot,Obstacle-avoiding car

Additional Info :

Color Laser Sensor

10. JESSINIE TFmini Plus Lidar Module Single-Point TOF TF Mini Plus Laser Ranging Sensor Module 0.1m~12m 1-1000Hz IP65 Waterproof Dustproof Distance Sensor with UART for Arduino Raspbarry Pi

Features :

  • TFmini Plus is an upgraded product based on TFmini, based on the TOF (Time of Flight) principle, with unique optical, electrical, and algorithm design, mainly to achieve stable, accurate, high-sensitivity and high-speed distance measurement functions
  • Measurement range: 0.1m ~ 12m, Input voltage: 5V ± 0.5V, Frame rate: 1-1000Hz (adjustable), Receiving angle:3.6°
  • With IP65 protection, it is more adaptable to different environments such as outdoor strong light, different temperatures, and different reflectivity.
  • The product has the characteristics of low cost, small size, low power consumption, etc., and the power consumption is 550mW,with UART interface for Arduino Raspbarry Pi
  • TFmini Plus has stable performance, easy integration, and a wide range of application fields and scenarios. Suitable for unmanned aerial vehicles, industrial measurement, robots and smart homes.

Additional Info :

Item Dimensions
Height 0.728345
Width 0.82677
Length 1.37795

Buying Guide: What To Look For When Select arduino laser detectors: 

If you want to purchase products, follow a buying guide. Some features need to tick your products before buying. Let’s take a look at them:

  • Product Quality: The product must be of high quality. If the product is not of high quality, it will break down quickly and need repairing.
  • Price: The price of the product should be reasonable. The product must be within your budget so that you do not have any financial constraints while using it.
  • Brand reputation: The brand name should be well known in the market and has been around for a long time so that its reputation can be trusted and its quality can be ensured.

arduino laser detectors: Tips for Buying Online Safely

Online shopping has become a part of our everyday lives. The convenience of purchasing items from anywhere at any time is hard to beat. But it’s not all roses and sunshine. There are some real concerns when buying arduino laser detectors from online:

1. Use a Secure Wifi or Internet Connection

Although it is comfortable and easy to browse and buy through public networks, malls or stores, the truth is that these networks are often unreliable. Hackers and cybercriminals can easily capture the information packets transmitted over public connections. For this reason, we recommend you go through a secure network to make purchases or transactions in which you transfer personal information.

2. Keep Your Computer Updated and Protected

Online shopping is one of the processes in which more personal and dangerous information is transferred. Therefore, before shopping, ensure your computer is secure, updated and equipped with a good antivirus product.

3. Buy on Known and Reputable Websites

Searching the internet for the best offers can take you to the unknown and unreliable. Stay away from them. Check that the URL of the web site matches where you think it is, and its address begins with https. Shopping at trusted and reputable websites can prevent identity theft or data victims.

4.  Find and Review Privacy and Return Policies

Before buying from an online store, ensure that their Privacy Policy is easily located on the site and up to date. Do you know what to do if your gift is not right? How can you return it? These are also aspects to consider when choosing where to shop.

5. Only Share Personal Information That is Necessary and Only on a Secure Form

If it surprises you that they ask you for some personal information (mobile, relatives’ name, place of birth …) to carry out the purchase, do not do it, and it checks that you are in the correct place. In addition, tools such as the virtual keyboard of Panda Security can avoid data theft if your computer is infected with some virus spyware.

6. Avoid Links in Emails and Ads

Is the offer you received in an email too good to be true? Then, it probably is. During this time of year, e-mails and ads with offers and big discounts are a tool widely used by cybercriminals. Avoid phishing.

7. Periodically Check Your Credit Card Transactions

After making several purchases online, check that all charges on your account are known and controlled. If you find any suspicious activity, contact your bank. Maybe you’ve been a victim of identity theft.

Conclusion

There are many brands in the global and local market to choose from, but not all of them will offer you the arduino laser detectors. The key is finding a good brand that offers quality and value for your purchase. When choosing a good brand, critical considerations include customer reviews about their products, warranty policy, how long they’ve been around, and what other customers have said about their service record. We hope this post may help you narrow down your search so that now making an informed decision on which one to buy should be much easier!

 

Leave a Comment